Suitable for precision plastic processing and heavy-duty punching operations at high frequencies, as well as for cold and hot press forging. Can be used with automated peripheral equipment, and meets National Standards (CNS) Level 1 for accuracy.
Main Features:
►The unique knuckle-joint link mechanism delays the stop time of slide on lower dead point, it is most suitable for the processing requiring the high precision.
►Equipped with low inertia and high torque air pressure separated clutch and brake, providing smooth start and suitable for high frequency heavy load punching operations.
►The high rigidity body and slide mechanism can withstand larger eccentric loads. After heat treatment and tempering, the deformation of the body can be reduced.
►After heat treatment and grinding, the transmission mechanism can improve operation accuracy and eliminate vibration, reduce noise, and improve work efficiency.
►The slide uses high-precision eight-face extended guide rails, which can achieve the best accuracy for eccentric loads.
►Can be paired with automated peripheral equipment.
►Being suitable for the cold forging and warm forging processing.
►The accuracy meets the first level of the national standard (CNS).
※Drag right to see the full table
| 型式 MODEL |
CKH-400 | CKH-650 | CKH-1000 | CKH-1600 |
| 噸數(tons) Capacity(tons) |
400 | 650 | 1000 | 1600 |
| 能力發生點(mm) Tonnage rating point(mm) |
7 | 8 | 8 | 8 |
| 行程長度(mm) Length of stroke(mm) |
160 | 160 | 160 | 200 |
| 行程數(S.P.M.) Stroke per minute(S.P.M.) |
40 | 35 | 35 | 30 |
| 最大模高(mm) Die height (S.D.A.U)(mm) |
400 | 400 | 500 | 550 |
| 滑塊調整量(mm) Slide adjustment(mm) |
15 | 15 | 15 | 15 |
| 滑塊面積(L.R. x F.B.)(mm) Slide area (L.R. x F.B.)(mm) |
460x570 | 480x650 | 530x700 | 800x800 |
| 台盤面積(L.R. x F.B.)(mm) Bolster area (L.R. x F.B.)(mm) |
550x700 | 600x750 | 700x800 | 800x1000 |
| 主馬達(HPxP) Main motor (HP x P) |
40x4 | 50x6 | 75x4 | 100x4 |
| 滑塊調整馬達(HP x P) Slide adjustment motor (HP x P) |
1x4 | 3x6 | 5x6 | 5x6 |
| 空氣壓力(Kg x cm2) Required air pressure (Kg x cm2) |
5 | 5 | 5 | 5 |
Remarks: Specifications are subject to change without notice.